Use arrows ( ) to select the day(s) you want the timer to be active and press Set ( ). (Default is 10PM for all days.) Days of the week will then flash on screen. Select desired off time and press Set ( ). My Off Time: Press “my off time” button and the clock will begin flashing.(Default is 6PM for all days.) Days of the week will then flash on screen. Use arrows to set the desired on time ( ) and press Set ( ). My On Time: Press “my on time” button and the clock will begin flashing.Use arrows ( ) to select the correct day options and press set ( ). Days of the week will flash on the screen. Use arrows ( ) to adjust time (time can be adjusted up to 1 hour in either direction) and press Set ( ). Evening – Sunset to 12:AM: Press “evening” button and the sunset time will flash on the screen.To deactivate program, press the button again and the LED will turn off. Note: If the LED on a button is illuminated, this indicates that the program is active. Once settings are complete, either wait 10 seconds and the timer will automatically go to clock mode, or press and hold “Set” ( ) for 3 seconds. Use the ( ) to scroll to the setting you were at. To re-enter settings, press and hold Set ( ) for 3 seconds. Note: If no button is pushed for 10 seconds, the timer will go back to clock mode. Use ( ) to select “ON” if you would like the timer to automatically adjust for Daylight Savings Time or “OFF” if you would not like the timer to adjust automatically. “DST” (Daylight Savings Time) will flash on the screen.Zone is used to determine sunrise/sunset times. ![]() Use ( ) to select current zone (see Figure 1). Use ( ) to select the current day and press Set ( ). Use ( ) to select the current month and press Set ( ). Use ( ) to select the current year and press Set ( ). Use ( ) to select current time and press Set ( ). ![]() Hold Set ( ) for 3 seconds and current time will flash on the screen. Note: When timer is reset, the time will flash. Use up ( ) and down ( ) arrows to set current time.
0 Comments
Leave a Reply. |